User library

The AN30 Application Note demonstrates how to read consumption data from NETIO 4x and PowerCable REST smart socket devices and how to control their outputs using REST API – JSON. The netio.json file is transferred over http. Node-RED is a programming tool for wiring together hardware devices, APIs and online services. It can run, for example, in a cloud, on a local PC, or in a Raspberry Pi.


Do you have any questions?

Supported devices: NETIO 4AllNETIO PowerPDU 4CNETIO 4PowerCable RESTPowerBOX 3PxPowerPDU 4PS, PowerDIN 4PzPowerBOX 4Kx, PowerPDU 8QS


The AN30 Application Note shows two examples of working with NETIO smart outlets using http transfer of netio.json files.

  • The first example demonstrates the measurement functions and options, as well as the control of one outlet (Output 1).
  • The second example, AN30v2, is a simplified version that can serve as a template for your Node-RED projects.


The first AN30 Node-RED flow demonstrates the control of output no. 1 from the Dashboard that runs in the Node-RED environment. Five buttons displayed in the Dashboard call the five possible actions that can be performed with the output (off, on, short off (restart), short on, toggle). The netio.json file is uploaded to the http server of the smart socket device using http POST.

The dashboard periodically displays the states of all outputs as well as the measured values from the NETIO 4x device (current, voltage, total load), as long as the device is capable of measuring them. The reading of the output states and measured parameters takes place by downloading the netio.json file every second from the http server of the NETIO smart socket device using http GET.

Details about the M2M protocol: Description of the http(s) REST JSON protocol



The Node-RED environment can run on a PC, a Raspberry Pi, in a cloud (MS Azure, IBM) and so on.

Node-RED is very popular, so we have prepared more examples:



Flow (Node-RED script) for AN30:


Dashboard for AN30:


NETIO REST JSON http(s) protocol

The current outlet state when reading (0 / 1) is in the State variable. This variable is read/write, as long as the Action variable is omitted or set to 6.

If the Action variable in the uploaded netio.json file is set to a value different than 6, it takes priority and the value in the State variable is ignored.


Actions applicable to each output (electrical socket)

In all M2M protocols, NETIO power sockets use the same actions that can be applied to individual outputs. For example, a Toggle or Short Off action can be written to any output.

However, the Action variable can only be used for writing values, it cannot be used to read the current outlet state.


  •  0 = Output switched off (Off)
  •  1 = Output switched on (On)
  •  2 = Output switched off for a short time (short Off)
  •  3 = Output switched on for a short time (short On)
  •  4 = Output switched from one state to the other (toggle)
  •  5 = Output state unchanged (no change)
  •  6 = Ignored

The value of 6 in the action tag means that the action is ignored and the outlet state is set according to the “State” variable (allowed values are 0 and 1 only). See the M2M JSON documentation.


Example – JSON file to toggle the output no. 1:


 "Outputs": [{

  "ID": 1,

  "Action": 4




Configuring NETIO 4x

In the M2M API Protocols - JSON API section of the web interface, enable URL JSON API.

Set the Username and Password for READ-WRITE access.

READ-WRITE credentials allow both reading and writing. The same READ-WRITE credentials can be used in both HTTP Request nodes (POST and GET).

Click Save Changes. After saving the changes, the device restarts (about 1 minute).


Try online demo on the NETIO 4All product web

NETIO 4All Online demo

Online demo is a physical NETIO device connected to the Internet at a public IP address. The manufacturer makes available a demo device of each model. The online demos have different configurations, so it is possible to test the behavior without having the devices physically in hand.

In the online demos, configuration changes cannot be saved.

To access the online demo of a product, click “TRY ON-LINE DEMO” at the respective product page.



Node-RED is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. Node-RED provides a browser-based flow editor and a wide choice of nodes and options. It is built on Node.JS, making it ideal to run on low-cost hardware such as the Raspberry Pi as well as in the cloud.


AN30 flow (script)

The Node-RED configuration is specified in a json structure and can be pasted via the clipboard.



Importing the AN30 flow to node-RED

In the menu, select Import -> Clipboard.

Then, copy the text to the indicated field and click Import.


Installing missing nodes

The nodes are loaded into the selected flow. It is possible that an error message is displayed with a list of nodes that are being imported but are not installed in Node-RED yet. In this case, the missing nodes need to be installed.

If there are nodes missing, select Manage palette in the menu, click Install and find the missing nodes.


How does the AN30 (JSON REST API) Flow work


AN30 primarily consists of two parts: POST and GET.


POST: Writing to O1

  • Five buttons created in the Dashboard in the Flow are displayed in the Dashboard.
  • After clicking the Output 1 = ON button in the Dashboard, the payload is set to the netio.json file that specifies the output and the action (defined for each of the buttons).
  • The HTTP Request (POST) node sends the netio.json file as a request to an IP address.
  • The server response (status) is returned as the output.
  • The Msg.payload node displays the result from HTTP Request (POST).


GET: Reading from O1 – O4

  • The 1 Second Repeat node activates, with a period of one second, the HTTP Request (GET) node, which in turn sends netio.json as a GET request and returns a complete JSON file with the socket status as received from the server.
  • The JSON Parse node transforms the JSON file from the HTTP Request (GET) node to a JSON Object so that it is possible to manipulate the properties in the JSON file.
  • The Function node takes individual parts of the JSON object and transforms them into properties of a msg object for later use.
  • The Current Chart node sets msg.payload to the msg.TotalCurrent property of the msg object, because the subsequent Current Chart (Device) node can only display the msg.payload value.
  • Various output nodes then follow in order to display selected properties of the msg object, as taken from the JSON object, in the Dashboard. 


The msg object and msg.payload

For a simple and concise explanation, see here:


Node-RED flow nodes

Button node

Adds a button to the Dashboard.

Clicking the button node generates a message containing a netio.json file.

The netio.json file is set as the payload.

The netio.json file can be displayed and modified by clicking the indicated button.

Possible actions with the outputs are:

  • 0 = Output switched off (Off)
  • 1 = Output switched on (On)
  • 2 = Output switched off for a short time (short Off)
  • 3 = Output switched on for a short time (short On)
  • 4 = Output switched from one state to the other (toggle)
  • 5 = Output state unchanged (no change)


Example of a netio.json file:


HTTP Request node

HTTP Request (POST)

This node sends a netio.json command file as a HTTP Request (POST) in order to control the NETIO 4x device.


HTTP Request (GET)

This node sends a HTTP Request (GET) and returns the status response.


The pre-filled address points to the online demo, where you can test the connection without having a NETIO device at your desk.


It is possible to set your own IP address in these nodes; however, the IP needs to be changed in both the HTTP Request nodes, POST as well as GET.


Text node

Displays a text field in the Dashboard. In AN30, the text nodes display the current, voltage, model, firmware version or JSON version.

The Label is displayed in the Dashboard, and the Name is the node name displayed in the flow in Node-RED.

{{msg.O1_Color}} changes the color according to the {{msg.O1_State}} value.


Debug node

Displays the msg.payload.

By default, it is set to msg.payload, and therefore it displays the server response in Node-RED.


JSON node

This node parses the JSON file and transforms it into a JSON object.

As a response from the server to the GET request, the HTTP Request node returns a JSON file containing the current status of the NETIO 4x device.

However, in order to work with the data, the JSON file needs to be parsed into a JSON object


Inject node

Every second, this node activates the HTTP Request node that sends a GET request. As a result, the values in the Dashboard are updated with a period of one second.


Chart node

This node plots the current chart in the Dashboard according to the payload value.

This node can only plot charts according to the payload value.

For this reason, a function node is used to set msg.payload to the value that needs to be displayed.

msg.payload = msg.TotalCurrent;


Gauge node

This node adds a gauge widget to the Dashboard.

In AN30, each gauge visualizes one property of the msg object: voltage [V], curent [A], frequency [Hz] and the overall True Power Factor (TPF).


Function node

A function node is a special node that enables writing a custom JavaScript function.

In AN30, the function picks values from the parsed JSON file (now a JSON object) and assigns them to the properties of the msg object.


The code is divided into four sections:

  • Assigning values from the JSON object to the individual properties of the msg object


  • Error handling in case the NETIO 4x device does not support global measurements


If the NETIO 4x device does not support the measurement of global values, Node-RED would display errors because this function would not find the respective property, e.g. msg.payload.GlobalMeasure.Voltage, since it would not be present in the JSON object. In this case, the property of the msg object, e.g. msg.Voltage, is set to 0 and the error is caught.

  • Assigning output state values


  • Setting the colors of the displayed output state values according to the output states


Link node

Link in and link out nodes work like a tunnel. The msg.payload arrives into the link in node and goes out of the link out node.

In AN30, this is used to make the flow a bit clearer.


Node-RED Dashboard

The Dashboard is a graphical representation of dashboard elements.

The Dashboard can be opened by clicking the indicated symbol, or at the address of your Node-RED server with ui appended, e.g.:


The menu in the Dashboard includes a link to NETIO products website:


AN30 v2 flow

AN30v2 is a simplified version that can be easily used in your Node-RED projects if you only need to read the outlet states and control them.

AN30 v2 controls outputs 1 to 4 and reads their states.


The Node-RED configuration is specified in a JSON structure and can be pasted via the clipboard.



1) Is it possible to use an IP address different from the pre-filled one?

Yes, the IP address can be set in the HTTP Request nodes. It has to be changed in both of them: the HTTP Request (POST) node as well as the HTTP Request (GET) node.


2) Is it possible to control a different output than the output No. 1?

Yes. If the device has multiple outputs, the output number can be changed by changing the ID number in the netio.json control file in the button node.

Example: {"Outputs":[{"ID":2,"Action":1}]}


3) I have changed the flow in Node-RED but the changes are not reflected in the Dashboard.

To save and display all changes in the flow, it is necessary to click Deploy in the upper right-hand corner in Node-RED.


4) How can I install Node-RED on my PC?

The official Node-RED website provides detailed instructions and a free installer.

Website: https://nodered.org/docs/getting-started/


5) Is it possible to install Node-RED on devices other than a PC?

Yes, Node-RED can run e.g. on Raspberry Pi, Arduino or Microsoft Azure.


6) Is any special software needed to modify JSON files?

No, a JSON file is essentially a plain text file. It can be opened and edited even in Notepad or in MS Word.


7) Is it possible to put a DNS name instead of the numerical IP address?

Yes, numerical as well as textual form is acceptable.

The default setting is the DNS address of the NETIO 4All online demo. You can test AN30 without having a device at your desk.


8) In the debug section of Node-RED, the following message appears: {"Result":{"Error":{"Code":401,"Message":"Unauthorized"}}}

The login credentials are incorrect.

9) In the debug section of Node-RED, the following message appears: Error: connect ETIMEDOUT.

The IP address is probably incorrect.

10) In the debug section of Node-RED, the following message appears: {"Result":{"Error":{"Code":400,"Message":"Bad request"}}}

Incorrect format of the netio.json file. Double-check the netio.json files in all button nodes.




Supported FW versions for NETIO 4x:

3.1.0 and higher  (Firmaware archive)


Supported FW versions of PowerCable xxx:

2.0.2 and higher (Firmware archive)



Ask for a price or technical parameters

For device testing use name/password demo/demo